Homepage | Enamels | Other Resins

Other Resins

Here are the other resin variations that we sell.



Thixotropic Resin (CHEMSET ES 8124)

This resin is to be used with the Thixotropic hardener (CHEMSET ES 8221).

The Thixotropic resin is designed specifically to be used on curved surfaces.  It forms a thick coating that "sticks" to the surface and does not run off the edge or to the sides.

The Thixotropic enamel looks better when coloured as it is not entirely clear.

The enamel can be made thinner by using the Type A hardener (CHEMSET ES 8204) instead of the Thixotropic hardener.

If even less viscosity is required, the Thixotropic resin can be blended with the Type A resin (CHEMSET ES 8103).

Available in 30g jars, 1kg and 5kg cans.

Thixotropic Hardener (CHEMSET ES 8221)

To be used with the Thixotropic resin (CHEMSET ES 8124) only.

Available in 15g jars, 2.5kg and 5 kg cans.

Superglaze Resin (CHEMSET ES 8110)

This is a Type A resin to be used with the Type A hardener (CHEMSET ES 8204).

The Superglaze enamel is best used over white backgrounds where it gives a very bright effect and does not fade.

It cannot be used with any coloured resins due to the way it "bleaches" the colour to give the bright effect.

Available in 20g bottles, 1kg and 5kg cans plus 25kg containers.

Hard Resin (CHEMSET ES 8106)

This is a Type B resin to be used with the Type B hardener (CHEMSET ES 8203).

The hard enamel is designed specifically to be used when the surface area is to be linished or polished to create a very flat surface.

Available in 1kg or 5kg cans.

Flexible Resin (CHEMSET ES 8115)

This is a Type B resin to be used with the Type B hardener (CHEMSET ES 8203) in the ratio 100 parts resin to 40 parts hardener by weight.

The flexible enamel can be used on fabrics, paper, plastic, etc to be entrirely flexible.

It can be poured into a mould to create a 3D flexible or soft feeling enamel piece.

It can be used with the opaque or fluroescent Colour Pastes, using the guidelines on the relevant page, to give it colour.

Available in 50g bottles, 1kg and 5kg cans.

Eco Resin (CHEMSET ES 8119)

This is a Type B resin to be used with the Type B hardener (CHEMSET ES 8203).

CHEMSET Eco resin is a lightly fragranced, solvent-free, non-toxic, easy to use, versatile epoxy resin that gives the same high quality finish as our other enamelling resin systems coupled with a reduced carbon footprint and reduced environmental impact compared to other products that can be used for the same purpose.

Available in 50g bottles, 1kg and 5kg cans.

Intense Black (CHEMSET ES 8510)

This is a Type B resin to be used with the Type B hardener (CHEMSET ES 8203) in the ratio of 100 parts resin to 50 parts hardener by weight.

This enamel gives a very intense colour due to the colour being ground straight into the resin part of the mix.

It does not allow the colour of the background to show through the enamel.

Available in 5kg cans only.

Intense White (CHEMSET ES 8511)

This is a Type B resin to be used with the Type B hardener (CHEMSET ES 8203) in the ratio of 100 parts resin to 40 parts hardener by weight.

This enamel gives a very intense colour due to the colour being ground straight into the resin part of the mix.

It does not allow the colour of the background to show through the enamel.

Available in 5kg cans only.